Window tint?

Ok this is actually 2 questions:

1)Will windows with auto defrost wires ruin a regular tint and should i buy a heat resistant tint?

2)How do i remove tint from a window with defrost wires because it is bubbling up and looks like **** and when i tried to peel a little off it jus kinda shredded.

any advice will be much appreciated.Window tint?
defrost wires will not ruin tint regular tint will do that is made for vehicles, as far as the back glass do not peel anymore you might peel off the heating strip and those are like 50 bucks a piece! How do i know this is because my buddy tried doing that to his civic and tore those strips right off with the tint, i would go to a proffesional to have it removed it should take about 5 hours or so on a sunnt day, good luck and have professional retint
Have a professional do it because when you get it half way done and all messed up we charge you more to finish up your mess!

Report Abuse

Window tint?
have a pro do it and then you will not have to repeat the same mistake.putting window tint on is not something for a amateur
Even the heat resistant variety will bubble up around it over time. I suggest not putting anything over auto defrost wires unless you don't use the defrost unit. Pull the fuse or don't tint that window.



To remove it, use Acetone (finger nail polish remover) and a razor blade. Just so you know, the acetone can eat rubber and some paints if you're not careful.Window tint?
This site may answer all your questions without any smart remarks.http://www.tintdude.com/
ANSWER FOR QUESTION #2 ONLY....SPRAY SOAPY WATER ON BACK WINDOW,PUT A CUT TRASH BAG OVER THIS SOAPY WINDOW,LET IT DRY FOR A DAY,SIMPLY PULL OFF BAG AND WINDOW TINT WILL COME WITH IT...I LEARNED THIS FROM A WINDOW TINT EXPERT..I HOPE IT HELPS YOU OUT...